Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT BELT
SEAT BELT WARNING SYSTEM - DATA LIST / ACTIVE TEST
| READ DATA LIST |
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / (desired system) / Data List.
According to the display on the intelligent tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| P-Seatbelt Buckle SW*1 | Front passenger side seat belt buckle signal / ON or OFF | ON: Front passenger side seat is occupied, front passenger side seat belt is fastened OFF: Front passenger side seat is occupied, front passenger side seat belt is unfastened | - |
| D - Seatbelt Warning Buzzer*2 | Driver side seat belt warning signal / ON or OFF | ON: Driver side seat belt warning buzzer is sound OFF: Driver side seat belt warning buzzer is not sound | The current customize setting is displayed. |
| P - Seatbelt Warning Buzzer*1, *2 | Front passenger side seat belt warning signal / ON or OFF | ON: Front passenger side seat belt warning buzzer is sound OFF: Front passenger side seat belt warning buzzer is not sound | The current customize setting is displayed. |
*1: w/ Airbag System
*2: w/ Seat Belt Warning Buzzer
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Driver Buckle SW | Driver side seat belt / Set, Unset or NG | Set: Driver side seat belt is fastened Unset: Driver side seat belt is unfastened | NG: Data is not determined |
| Passenger Buckle SW | Front passenger side seat belt / Set, Unset or NG | ON: Front passenger side seat is occupied, front passenger side seat belt is fastened OFF: Front passenger side seat is occupied, front passenger side seat belt is unfastened | - |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| D Seat Buckle SW | Driver side seat belt / ON or OFF | ON: Driver side seat belt is fastened OFF: Driver side seat belt is unfastened | - |
| PERFORM ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Combination Meter / Active Test.
According to display on the intelligent tester, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Driver Side Seat Belt | Driver side seat belt warning light | ON/OFF | Confirm that the vehicle is stopped and the engine is idling. |
| Front Passenger Side Seat Belt* | Front passenger side seat belt warning light | ON/OFF | Confirm that the vehicle is stopped and the engine is idling. |
*: w/ Airbag System