Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT BELT
SEAT BELT WARNING SYSTEM - CUSTOMIZE PARAMETERS
| CUSTOMIZING FUNCTION WITH TECHSTREAM |
- HINT:
- The following items can be customized.
- NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Utility / Customize / Warning.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting | Relevant ECU |
| D-Seatbelt Warning Buzzer*1 | ON | If driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. | ON or OFF | Combination meter assembly |
| P-Seatbelt Warning Buzzer*1, *2 | ON | If front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. | ON or OFF | Combination meter assembly |
*1: w/ Seat Belt Warning Buzzer
*2: w/ Airbag System