Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING INT
ROOM LIGHT (for Front) - REMOVAL
- HINT:
- When only replacing the room light bulbs, use the following procedures.
| 1. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof) |
Using a screwdriver, detach the 2 claws and open the 2 covers.
- HINT:
- Tape the screwdriver tip before use.
Remove the 2 screws.
Detach the 2 clips and 2 guides.
Disconnect the connector and then remove the map light.
| 2. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof) |
Using a screwdriver, detach the 2 claws and open the 2 covers.
- HINT:
- Tape the screwdriver tip before use.
Remove the 2 screws.
Detach the 2 clips and 2 guides.
Disconnect the connector and then remove the map light.
| 3. REMOVE MAP LIGHT BULB |
Turn the 2 map light bulbs in the direction indicated by the arrows and remove them.