Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING INT
RELAY - ON-VEHICLE INSPECTION
1. INSPECT LIGHT CUT RELAY |
Remove the light cut relay from the engine room relay box.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher Battery voltage applied to terminals 1 and 2 Below 1 Ω
If the result is not as specified, replace the light cut relay.
Install the light cut relay to the engine room relay box.