Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT BELT
REAR NO. 2 SEAT OUTER BELT ASSEMBLY - REMOVAL
- HINT:
| 1. REMOVE REAR NO. 2 SEAT ASSEMBLY |
Remove the rear No. 2 seat assembly ().
| 2. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE |
Detach the 6 clips and remove the support plate.
| 3. REMOVE REAR STEP COVER |
- HINT:
- Use the same procedure to remove the step cover on the other side.
Detach the 2 claws and remove the step cover.
| 4. REMOVE REAR DOOR SCUFF PLATE LH |
Remove the screw.
Detach the 3 claws and 4 clips, and remove the scuff plate.
| 5. REMOVE REAR NO. 2 SEAT COVER BEZEL |
Detach the 6 clips and remove the rear No. 2 seat cover bezel.
| 6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH |
- HINT:
- When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.
Detach the 3 claws and remove the cover.
Remove the bolt and disconnect the rear seat outer belt floor anchor.
for LH Side:
Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor LH.
for RH Side:
Detach the 3 claws and remove the cover.
Remove the bolt and disconnect the rear seat outer belt floor anchor RH.
Remove the clip and bolt.
Detach the 18 clips and 2 claws.
w/o Rear Air Conditioning System:
Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.
w/ Rear Air Conditioning System:
Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.
| 7. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH |
Remove the bolt and disconnect the seat belt shoulder anchor.
Using a screwdriver, detach the 2 claws and open the seat belt anchor cover as shown in the illustration.
- HINT:
- Tape the screwdriver tip before use.
Remove the bolt and seat belt shoulder anchor.
Remove the bolt and rear No. 2 seat outer belt.