Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT BELT
REAR NO. 2 SEAT OUTER BELT ASSEMBLY - INSTALLATION
- HINT:
| 1. INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH |
Align the claws with the seat belt positioning holes and install the retractor of the seat belt as shown in the illustration.
Install the seat belt with the bolt.
- Torque:
- 42 N*m{ 427 kgf*cm, 31 ft.*lbf}
Install the seat belt shoulder anchor with the bolt.
- Torque:
- 42 N*m{ 427 kgf*cm, 31 ft.*lbf}
Attach the 2 claws to close the seat belt shoulder anchor cover.
| 2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH |
- HINT:
- When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.
w/o Rear Air Conditioning System:
Connect the rear seat lock control lever cable.
w/ Rear Air Conditioning System:
Connect the thermistor connector and rear seat lock control lever cable.
Attach the 18 clips and 2 claws to install the quarter trim panel.
Install the clip and bolt.
- Torque:
- 12 N*m{ 122 kgf*cm, 9 ft.*lbf}
for LH Side:
Install the rear No. 2 seat belt anchor LH with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
for RH Side:
Install the rear No. 2 seat belt anchor RH with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
Attach the 3 claws to install the cover.
Install the rear No. 1 seat belt anchor with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
Attach the 3 claws to install the cover.
| 3. INSTALL REAR NO. 2 SEAT COVER BEZEL |
Attach the 6 clips to install the rear No. 2 seat cover bezel.
| 4. INSTALL REAR DOOR SCUFF PLATE LH |
Attach the 3 claws and 4 clips to install the scuff plate.
Install the screw.
| 5. INSTALL REAR STEP COVER |
- HINT:
- Use the same procedure to install the step cover on the other side.
Attach the 2 claws to install the step cover.
| 6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE |
Attach the 6 clips to install the support plate.
| 7. INSTALL REAR NO. 2 SEAT ASSEMBLY |
Install the rear No. 2 seat assembly ().