Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type) - REASSEMBLY

  • CAUTION:
  • Wear protective gloves. Sharp areas on the parts may injure your hands.
  • HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. INSTALL NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY

Install the release handle with the bolt.

2. INSTALL REAR SEATBACK LOCK STRIKER COVER LH

Attach the 2 clamps to install the cover.

3. INSTALL REAR NO. 2 SEATBACK COVER LH

Attach the 3 claws to install the cover.

4. INSTALL REAR SEATBACK LOCK STRIKER ASSEMBLY LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the lock striker with the 2 nuts.

  • Torque:
  • 14 N*m{ 138 kgf*cm, 10 ft.*lbf}
5. INSTALL REAR SEAT LOCK CONTROL CABLE
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 clamps to install the lock control cable.

Attach the 2 cable clamps to connect the 2 cables.

6. INSTALL REAR INNER SEAT RECLINING COVER RH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the claw to install the cover.

Install the screw.

7. INSTALL REAR INNER SEAT RECLINING COVER LH

Attach the claw to install the cover.

Install the screw.

8. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.

  • NOTICE:
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
Text in Illustration
*1Hog Ring Pliers
9. INSTALL SEATBACK COVER WITH PAD
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using hog ring pliers, install the seatback cover with pad to the seatback frame with a new hog rings.

LH Side:

w/ Rear Center Seat Headrest:

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200
Attach the 8 claws to install the 4 headrest supports.
Install the rear seat protector.
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200
Insert the center headrest storage bag.
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200
Attach the 2 hooks.
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200
Close the fastener.

w/o Rear Center Seat Headrest:

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200
Attach the 4 claws to install the 2 headrest supports.
Install the rear seat protector.
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200
Attach the hook.

RH Side:

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the 2 headrest supports.

Install the rear seat protector.

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the hook.

10. INSTALL REAR SEAT HEADREST HANDLE

Install the snap ring to the headrest handle.

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the headrest handle to the headrest.

11. INSTALL REAR SEAT HEADREST ASSEMBLY (w/ Folding Headrest)
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

While releasing the lock inside the headrest support with a screwdriver, install the headrest.

  • HINT:
  • Tape the screwdriver tip before use.
Text in Illustration
*1Protective Tape
12. INSTALL REAR SEAT HEADREST ASSEMBLY (w/o Folding Headrest)
13. INSTALL REAR SEAT HINGE PAWL GUIDE
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the guide with the screw.

14. INSTALL REAR SEAT HINGE PAWL GUIDE
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 5 claws to install the guide.

15. INSTALL REAR LOWER SEATBACK LOCK BEZEL
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws and clip to install the seatback lock bezel.

16. INSTALL REAR NO. 2 SEATBACK CUSHION
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the seatback cushion with the screw.

17. INSTALL NO. 3 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 clamps to install the 2 cables.

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 cable clamps to connect the 2 cables.

18. INSTALL NO. 2 SEAT STAY SUB-ASSEMBLY
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the seat stay with the bolt.

19. INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/o Bottle Holder:

Attach the fastening tape to install the seatback cover.

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

  • NOTICE:
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
Text in Illustration
*1Hog Ring Pliers
*2Fastening Tape
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ Bottle Holder:

Attach the 3 fastening tapes to install the seatback cover.

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

  • NOTICE:
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
Text in Illustration
*1Hog Ring Pliers
*2Fastening Tape
20. INSTALL NO. 3 SEAT CUSHION PAD LH
21. INSTALL SEAT CUSHION COVER WITH PAD
22. INSTALL NO. 2 BOTTLE HOLDER
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the No. 2 bottle holder with the 2 screws.

23. INSTALL CAP
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the 2 caps.

24. INSTALL REAR SEAT CUSHION CARPET
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the seat cushion carpet with new tack pins.

25. INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

Install the 2 belts.

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

  • NOTICE:
Make sure the claws are facing away from the seat.
Do not overlap the anchor part of the seat belt and protruding parts of the seat.
26. INSTALL REAR CENTER SEAT INNER BELT LH (w/ Rear Center Seat Headrest)
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the belt with the nut.

  • Torque:
  • 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
  • NOTICE:
  • Do not overlap the anchor part of the seat belt and protruding parts of the seat.
  • HINT:
  • The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, connect it when installing the rear seat inner belt.
27. INSTALL REAR CENTER SEAT INNER BELT RH (w/ Rear Center Seat Headrest)
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the belt with the nut.

  • Torque:
  • 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
  • NOTICE:
  • Do not overlap the anchor part of the seat belt and protruding parts of the seat.
  • HINT:
  • The rear No. 2 seat inner belt is fixed with the same nut as the rear seat outer belt. Therefore, connect it when installing the rear seat outer belt.
28. INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the cable clamp to connect the cable.

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the claw to install the release lever.

Install the screw.

29. INSTALL SEAT STAND FRAME CAP
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the stand frame cap.

30. INSTALL REAR SEAT LOCK COVER LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 clamps to install the cover.

Install the 2 screws.

31. INSTALL NO. 3 SEAT LEG COVER NO. 2
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the cover.

Install the 2 screws.

32. INSTALL NO. 3 SEAT FRONT BRACKET COVER LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the cover.

33. INSTALL REAR SEAT CUSHION UNDER COVER LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the cover with the 7 screws.

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 16 claws.

34. INSTALL 3RD SEAT CUSHION LOCK COVER
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the 2 covers.

35. INSTALL 3RD SEAT LINK SUB-ASSEMBLY LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the seat link with the bolt and nut.

  • Torque:
  • 8.5 N*m{ 87 kgf*cm, 75 in.*lbf}
36. INSTALL NO. 2 SEAT LEG COVER NO. 2
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the seat leg cover with the screw.

37. INSTALL REAR NO. 3 SEAT LEG COVER LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the seat leg cover with the 2 screws.

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the spring of the seat stay ball-joint.

Connect the seat stay to the seat frame.

38. INSTALL REAR SEAT REAR BRACKET COVER REAR

Attach the 2 claws to install the cover.

39. INSTALL RECLINING ADJUSTER COVER RH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 5 claws in the order shown in the illustration to install the cover.

Install the screw.

40. INSTALL RECLINING ADJUSTER COVER LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws in the order shown in the illustration to install the cover.

Install the screw.

41. INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the release handle with the screw.

42. INSTALL SEAT ADJUSTER BOLT COVER
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cover.

SEAT
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
REAR NO. 2 SEAT ASSEMBLY except Face to Face Seat Type