Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
REAR NO. 1 SEAT ASSEMBLY (for Bench Seat Type) - INSTALLATION
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
| 1. INSTALL REAR SEAT CUSHION HOLDER BRACKET |
- HINT:
- Use the same procedure to install the rear seat cushion holder bracket on the other side.
Install the rear seat cushion holder bracket with the 2 bolts.
- Torque:
- 37 N*m{ 377 kgf*cm, 27 ft.*lbf}
| 2. INSTALL REAR SEAT CUSHION LOCK STRIKER SUB-ASSEMBLY |
- HINT:
- Use the same procedure to install the rear seat cushion lock striker sub-assembly on the other side.
Install the rear seat cushion lock striker with the 2 bolts.
- Torque:
- 37 N*m{ 377 kgf*cm, 27 ft.*lbf}
Return the rear floor silencer to its original position.
Return the front floor carpet to its original position and attach the fastener.
| 3. INSTALL REAR SEAT NO. 2 PROTECTOR |
- HINT:
- Use the same procedure to install the rear seat No. 2 protector on the other side.
Attach the 4 claws to install the rear seat No. 2 protector to the rear seat cushion lock striker sub-assembly.
| 4. INSTALL REAR DOOR SCUFF PLATE LH |
Attach the 3 claws and 4 clips to install the scuff plate.
Install the screw.
| 5. INSTALL REAR DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedures described for the LH side.
| 6. INSTALL REAR STEP COVER |
- HINT:
- Use the same procedure to install the step cover on the other side.
Attach the 2 claws to install the step cover.
| 7. INSTALL REAR NO. 1 SEAT ASSEMBLY |
Place the rear No. 1 seat assembly in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Temporarily install the rear No. 1 seat assembly with the 4 bolts.
Tighten the 2 bolts in the order shown in the illustration.
- Torque:
- 37 N*m{ 377 kgf*cm, 27 ft.*lbf}
Return the rear No. 1 seat assembly to its original position.
Tighten the 2 bolts in the order shown in the illustration.
- Torque:
- 37 N*m{ 377 kgf*cm, 27 ft.*lbf}
| 8. INSTALL REAR SEAT NO. 2 CUSHION HINGE COVER |
Operate the reclining remote control lever knob and fold down the rear No. 1 seat assembly.
Attach the 3 claws to install the rear seat No. 2 cushion hinge cover.
| 9. INSTALL REAR SEAT NO. 1 CUSHION HINGE COVER |
Attach the 3 claws to install the rear seat No. 1 cushion hinge cover.
| 10. INSTALL REAR SEAT NO. 4 CUSHION HINGE COVER |
Return the rear No. 1 seat assembly to its original position.
Attach the 6 claws to install the rear seat No. 4 cushion hinge cover.
| 11. INSTALL REAR SEAT NO. 3 CUSHION HINGE COVER |
Attach the 6 claws to install the rear seat No. 3 cushion hinge cover.