Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 40 Side) - REASSEMBLY

  • CAUTION:
  • Wear protective gloves. Sharp areas on the parts may injure your hands.
  • HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1. INSTALL REAR NO. 1 SEAT LOCK CONTROL LEVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the lock control lever with the bolt.

  • Torque:
  • 13 N*m{ 133 kgf*cm, 10 ft.*lbf}
2. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Temporarily install the seat cushion frame with the 5 nuts and bolt.

Tighten the 5 nuts.

  • Torque:
  • 42 N*m{ 428 kgf*cm, 31 ft.*lbf}

Using a T40 "TORX" socket, tighten the bolt.

  • Torque:
  • 21 N*m{ 214 kgf*cm, 15 ft.*lbf}
3. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the belt with the bolt.

  • Torque:
  • 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
  • NOTICE:
  • Do not overlap the anchor part of the seat belt and protruding parts of the seat.
4. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY RH (w/ Seat Heater System)
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the seat heater control.

5. INSTALL REAR SEAT CUSHION HOLDER BRACKET RH (w/ Seat Heater System)
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the holder bracket with the 2 screws.

Connect the seat wire connector.

6. INSTALL REAR NO. 1 SEAT LOCK CABLE ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the clamp to install the seat lock cable.

Attach the 3 cable clamps to connect the 3 cables.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the lower seat track bracket with the 2 nuts.

  • Torque:
  • 21 N*m{ 214 kgf*cm, 15 ft.*lbf}
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the lower seat track bracket with the 2 nuts.

  • Torque:
  • 21 N*m{ 214 kgf*cm, 15 ft.*lbf}
7. INSTALL FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the 2 fold seat lock control cables.

Attach the 2 cable clamps to connect the 2 cables.

8. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Temporarily install the seatback frame with the 4 bolts.

Using a T40 "TORX" socket, tighten the 4 bolts.

  • Torque:
  • 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
9. INSTALL NO. 1 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the clamp to install the lock control cable.

Attach the 2 cable clamps to connect the cable.

10. INSTALL RECLINING ADJUSTING CABLE ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the clamp to install the adjusting cable.

Attach the 2 cable clamps to connect the cable.

11. INSTALL REAR NO. 1 SEAT RECLINING COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the claw to install the cover.

Install the screw.

12. INSTALL REAR NO. 2 SEAT RECLINING COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the clamp to install the cover.

Install the screw.

13. INSTALL REAR SEAT RECLINING COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the claw to install the cover.

Install the screw.

14. INSTALL REAR SEAT RECLINING COVER LH

Attach the claw to install the cover.

Install the screw.

15. INSTALL REAR SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Set the seatback heater with the name stamp side facing the seatback cover.

Install the seatback heater with new tack pins.

16. INSTALL REAR SEPARATE TYPE SEATBACK COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using hog ring pliers, install the seatback cover with new hog rings.

  • NOTICE:
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ Rear Seat Side Airbag:


Connect the seatback cover bracket to the seatback pad.

17. INSTALL SEATBACK COVER WITH PAD

Install the seatback cover with pad.

w/ Rear Seat Side Airbag:


Pass the side airbag wire harness through the hole in the seatback.

w/ Seat Heater System:

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Pass the seatback heater wire harness through the hole in the seatback.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the seatback heater wire harness and install a new cable tie.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ Rear Seat Side Airbag:


Install the seatback cover bracket to the seat frame with the cap nut.

  • Torque:
  • 5.5 N*m{ 56 kgf*cm, 49 in.*lbf}
  • CAUTION:
  • After the seatback trim cover is assembled, make sure the side airbag strap is not twisted.
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using hog ring pliers, install new hog rings to the seatback frame.

18. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the 2 supports.

19. INSTALL REAR SEAT HEADREST ASSEMBLY
20. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Push the board down to attach the 2 claws on the bottom.

Attach the 2 claws on the top of the board to install it.

21. INSTALL REAR SEATBACK COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the cover.

22. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Set the seat cushion heater with the name stamp side facing the seat cushion cover.

Install the seat cushion heater with new tack pins.

23. INSTALL REAR SEPARATE TYPE SEAT CUSHION COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

  • NOTICE:
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 pieces of fastening tape.

24. INSTALL SEAT CUSHION COVER WITH PAD

Install the seat cushion cover with pad.

w/ Rear Seat Side Airbag:


Pass the side airbag wire harness through the hole in the seat cushion.

w/ Seat Heater System:

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Pass the seatback heater wire harness through the hole in the seat cushion.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the 2 seat heater connectors.

w/ Rear Seat Side Airbag:


Attach the side airbag wire harness clamps.

25. INSTALL FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY
26. INSTALL REAR SEAT TRACK HANDLE SUB-ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the cable clamp to connect the cable.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 cable clamps to connect the 2 cables.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the seat track handle with the 2 screws.

27. INSTALL REAR SEAT UNDER TRAY COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the cover.

Install the 2 screws.

28. INSTALL NO. 1 SEAT CUSHION PLATE
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws to install the seat cushion plate.

29. INSTALL REAR UNDER SIDE COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws and clip to install the cover.

Install the 5 screws.

30. INSTALL REAR SEAT COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cover.

Install the 3 screws.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 12 claws.

31. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the cable clamp to connect the cable.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the hinge with the 2 nuts.

  • Torque:
  • 42 N*m{ 428 kgf*cm, 31 ft.*lbf}

w/ Rear Seat Side Airbag:


Attach the wire harness clamp.

w/ Seat Heater System:


Attach the wire harness clamp.

32. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the hinge with the 2 nuts.

  • Torque:
  • 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
33. INSTALL REAR NO. 2 SEAT PROTECTOR

Install the wire harness, and attach the 2 claws to close the protector.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the claw to install the protector to the seat hinge.

Install the clip.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ Rear Seat Side Airbag:


Attach the claw to install the wire harness connector.

w/ Seat Heater System:


Attach the claw to install the wire harness connector.

34. INSTALL REAR SEAT SIDE HINGE MALE COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the clip to install the cover.

35. INSTALL REAR SEAT SIDE HINGE MALE COVER LH

Attach the clip to install the cover.

36. INSTALL REAR SEAT SIDE HINGE FEMALE COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 6 claws to install the 2 covers.

37. INSTALL FOLD SEAT STOPPER BAND ASSEMBLY

Install the fold seat stopper band to the seat leg side cover.

38. INSTALL REAR NO. 2 SEAT LEG SIDE COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Pass the fold seat stopper band through the seat leg side cover and attach it to the seat cushion frame with the bolt.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws to install the seat leg side cover.

Install the 4 screws.

39. INSTALL NO. 1 SEAT CUSHION COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the 2 covers.

40. INSTALL UPPER SEAT TRACK RAIL COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cover.

41. INSTALL UPPER SEAT TRACK RAIL COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cover.

42. INSTALL REAR NO. 1 SEAT RECLINING COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the cover.

Install the 2 screws.

43. INSTALL REAR NO. 1 SEAT RECLINING COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws in the order shown in the illustration to install the cover.

Install the 2 screws.

44. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the release handle with the screw.

45. INSTALL SEAT ADJUSTER BOLT COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Reassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cover.

SEAT
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
REAR NO. 1 SEAT ASSEMBLY for 60/40 Split Seat Type 40 Side