Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 40 Side) - DISASSEMBLY

  • CAUTION:
  • Wear protective gloves. Sharp areas on the parts may injure your hands.
  • HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1. REMOVE SEAT ADJUSTER BOLT COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a screwdriver, detach the 2 claws and remove the cover.

  • HINT:
  • Tape the screwdriver tip before use.
2. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the screw and release handle.

3. REMOVE REAR NO. 1 SEAT RECLINING COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 screws.

Detach the 3 claws in the order shown in the illustration, and then remove the cover.

4. REMOVE REAR NO. 1 SEAT RECLINING COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 screws.

Detach the 4 claws and remove the cover.

5. REMOVE UPPER SEAT TRACK RAIL COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a screwdriver, detach the 2 claws and remove the cover.

  • HINT:
  • Tape the screwdriver tip before use.
6. REMOVE UPPER SEAT TRACK RAIL COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a screwdriver, detach the 2 claws and remove the cover.

  • HINT:
  • Tape the screwdriver tip before use.
7. REMOVE NO. 1 SEAT CUSHION COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 4 claws and remove the 2 covers.

8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 4 screws and detach the 3 claws.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the bolt that is securing the fold seat stopper band and remove the seat leg side cover together with the fold seat stopper band.

9. REMOVE FOLD SEAT STOPPER BAND ASSEMBLY

Remove the fold seat stopper band from the seat leg side cover.

10. REMOVE REAR SEAT SIDE HINGE FEMALE COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a screwdriver, detach the 6 claws and remove the 2 covers.

  • HINT:
  • Tape the screwdriver tip before use.
11. REMOVE REAR SEAT SIDE HINGE MALE COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the clip and remove the cover.

12. REMOVE REAR SEAT SIDE HINGE MALE COVER RH

Detach the clip and remove the cover.

13. REMOVE REAR NO. 2 SEAT PROTECTOR
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ Rear Seat Side Airbag:


Detach the claw and remove the wire harness connector.

w/ Seat Heater System:


Detach the claw and remove the wire harness connector.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a clip remover, remove the clip.

Detach the claw and remove the seat protector from the seat hinge.

Detach the 2 claws, open the protector and remove the wire harness.

14. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 nuts and hinge.

15. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ Rear Seat Side Airbag:


Detach the wire harness clamp.

w/ Seat Heater System:


Detach the wire harness clamp.

Remove the 2 nuts and hinge.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the cable clamp and disconnect the cable.

16. REMOVE REAR SEAT COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 12 claws.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 3 screws.

Detach the 2 claws and remove the cover.

17. REMOVE REAR UNDER SIDE COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 5 screws.

Detach the clip and 2 claws, and remove the cover.

18. REMOVE NO. 1 SEAT CUSHION PLATE
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 3 claws and remove the seat cushion plate.

19. REMOVE REAR SEAT UNDER TRAY COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 screws.

Detach the 4 claws and remove the cover.

20. REMOVE REAR SEAT TRACK HANDLE SUB-ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 screws and seat track handle.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 cable clamps and disconnect the 2 cables.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the cable clamp and disconnect the cable.

21. REMOVE FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY
22. REMOVE SEAT CUSHION COVER WITH PAD

w/ Rear Seat Side Airbag:

Detach the side airbag wire harness clamps.

Remove the side airbag wire harness through the hole in the seat cushion.

w/ Seat Heater System:

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Disconnect the 2 seat heater connectors.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the seatback heater wire harness through the hole in the seat cushion.

Remove the seat cushion cover with pad.

23. REMOVE REAR SEPARATE TYPE SEAT CUSHION COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 3 pieces of fastening tape.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the hog rings and cover.

24. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Cut off the tack pins which fasten the seat heater to the seat cushion cover, and then remove the seat cushion heater from the seat cushion cover.

25. REMOVE REAR SEATBACK COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a screwdriver, detach the 4 claws and remove the cover.

  • HINT:
  • Tape the screwdriver tip before use.
26. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws on the top of the board.

Pull up the board to detach the 2 claws on the bottom of the board and remove it.

27. REMOVE REAR SEAT HEADREST ASSEMBLY
28. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 4 claws and remove the 2 supports.

29. REMOVE SEATBACK COVER WITH PAD
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the hog rings.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ Rear Seat Side Airbag:

Remove the cap nut and seatback cover bracket from the seat frame.

Remove the side airbag wire harness through the hole in the seatback.

w/ Seat Heater System:

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Cut the cable tie and disconnect the seatback heater wire harness.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the seatback heater wire harness through the hole in the seatback.

Remove the seatback cover with pad.

30. REMOVE REAR SEPARATE TYPE SEATBACK COVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ Rear Seat Side Airbag:


Disconnect the seatback cover bracket from the seatback pad.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the hog rings and rear seatback cover.

31. REMOVE REAR SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Cut off the tack pins which fasten the seatback heater to the seatback cover, and then remove the seatback heater from the seatback cover.

32. REMOVE REAR SEAT RECLINING COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the screw.

Detach the claw and remove the cover.

33. REMOVE REAR SEAT RECLINING COVER RH

Remove the screw.

Detach the claw and remove the cover.

34. REMOVE REAR NO. 2 SEAT RECLINING COVER LH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the screw.

Detach the clamp and remove the cover.

35. REMOVE REAR NO. 1 SEAT RECLINING COVER RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the screw.

Detach the claw and remove the cover.

36. REMOVE RECLINING ADJUSTING CABLE ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 cable clamps and disconnect the cable.

Detach the clamp and remove the adjusting cable.

37. REMOVE NO. 1 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 cable clamps and disconnect the cable.

Detach the clamp and remove the lock control cable.

38. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a T40 "TORX" socket, remove the 4 bolts.

Remove the seatback frame.

39. REMOVE FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 cable clamps and disconnect the 2 cables.

Remove the 2 fold seat lock control cables.

40. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 nuts and lower seat track bracket.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 nuts and lower seat track bracket.

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 3 cable clamps and disconnect the 3 cables.

Detach the clamp and remove the seat lock cable.

41. REMOVE REAR SEAT CUSHION HOLDER BRACKET RH (w/ Seat Heater System)
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Disconnect the seat wire connector.

Remove the 2 screws and holder bracket.

42. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY RH (w/ Seat Heater System)
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws and remove the seat heater control.

43. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the bolt and belt.

44. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY RH
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a T40 "TORX" socket, remove the bolt.

Remove the 5 nuts and seat cushion frame.

45. REMOVE REAR NO. 1 SEAT LOCK CONTROL LEVER
Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) - Disassembly. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the bolt and lock control lever.

SEAT
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
REAR NO. 1 SEAT ASSEMBLY for 60/40 Split Seat Type 40 Side