Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT BELT
REAR CENTER SEAT INNER BELT ASSEMBLY (for Rear No. 2 Seat) - REMOVAL
| 1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH |
Remove the rear No. 2 seat assembly LH ().
| 2. REMOVE SEAT ADJUSTER BOLT COVER |
Using a screwdriver, detach the 2 claws and remove the cover.
- HINT:
- Tape the screwdriver tip before use.
| *1 | Protective Tape |
| 3. REMOVE NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH |
Remove the screw and release handle.
| 4. REMOVE RECLINING ADJUSTER COVER LH |
Remove the screw.
Detach the 3 claws in the order shown in the illustration, and then remove the cover.
| 5. REMOVE RECLINING ADJUSTER COVER RH |
Remove the screw.
Detach the 5 claws in the order shown in the illustration, and then remove the cover.
| 6. REMOVE REAR SEAT REAR BRACKET COVER REAR |
Detach the 2 claws and cover.
| 7. REMOVE REAR NO. 3 SEAT LEG COVER LH |
Using a screwdriver, remove the spring of the seat stay ball-joint.
Disconnect the seat stay.
Remove the 2 screws and cover.
| 8. REMOVE NO. 2 SEAT LEG COVER NO. 2 |
Remove the screw and seat leg cover.
| 9. REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH |
Remove the bolt, nut and seat link.
| 10. REMOVE REAR SEAT CUSHION UNDER COVER LH |
Detach the 16 claws.
Remove the 7 screws and cover.
| 11. REMOVE NO. 3 SEAT FRONT BRACKET COVER LH |
Detach the 4 claws and remove the cover.
| 12. REMOVE NO. 3 SEAT LEG COVER NO. 2 |
Remove the 2 screws.
Detach the 4 claws and remove the cover.
| 13. REMOVE REAR SEAT INNER BELT SUB-ASSEMBLY |
Remove the nut and belt.
- HINT:
- The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, it becomes disconnected when the nut is removed.
| 14. REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY |
Remove the belt.