Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT BELT
REAR CENTER SEAT INNER BELT ASSEMBLY (for Rear No. 1 Seat) - INSTALLATION
- HINT:
Use the same procedures for the LHD and RHD.
The procedures listed below are for the LHD.
| 1. INSTALL REAR SEAT INNER BELT ASSEMBLY |
Install the seat belt with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
- NOTICE:
- The anchor part of the seat belt must not overlap the protruding part.
| 2. INSTALL REAR NO. 1 SEAT RECLINING COVER RH |
Attach the claw to install the cover.
Install the screw.
| 3. INSTALL REAR NO. 1 SEAT ASSEMBLY LH |
Install the rear No. 1 seat assembly ().