Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - HEATING / AIR CONDITIONING
REAR AIR CONDITIONING PANEL - REASSEMBLY
| 1. INSTALL CENTER CLUSTER MODULE LENS |
Remove the double-sided tape from the control knob sub-assembly.
| *1 | Double-sided Tape |
Wipe off any tape adhesive residue with cleaner.
Remove the peeling paper from a new center cluster module lens.
- HINT:
- After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the center cluster module lens.
- NOTICE:
- Do not reuse the center cluster module lens after removing it.
| 2. INSTALL HEATER CONTROL KNOB |
Attach the 8 claws to install the heater control knob.
| 3. INSTALL HEATER CONTROL GUARD |
Install a new heater control guard.
| *1 | Heater Control Guard |
| 4. INSTALL CENTER CLUSTER MODULE CIRCUIT |
- NOTICE:
- As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.
Install the center cluster module circuit with the 2 screws.
| 5. INSTALL LOWER HEATER CONTROL BASE |
- NOTICE:
- As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.
Install the 3 screws.
Attach the 6 claws to install the lower heater control base.