Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PRE-CRASH SAFETY
PRE-CRASH SAFETY SYSTEM - DATA LIST / ACTIVE TEST
READ DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Pre-Crash / Data List.
According to the display on the intelligent tester, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
Driver Buckle SW | Driver side buckle switch status / UNSET, SET or NG | UNSET: Driver side seat belt unfastened SET: Driver side seat belt fastened NG: Indeterminate data | - |
Passenger Buckle SW | Front passenger side buckle switch status / UNSET, SET or NG | UNSET: Passenger side seat belt unfastened SET: Passenger side seat belt fastened NG: Indeterminate data | - |
Driver Belt Control | Seat belt control status of driver side seat / STOP, ON or ERROR | STOP: Control stopped ON: Controlled ERROR: Indeterminate data | Driver side seat belt is fastened |
Passenger Belt Control | Seat belt control status of passenger side seat / STOP, ON or ERROR | STOP: Control stopped ON: Controlled ERROR: Indeterminate data | Passenger side seat belt is fastened |
Number of Trouble Codes | Number of present trouble codes / Min.: 0, Max.: 255 | Number of DTCs present | - |
PERFORM ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: All ECUs / (desired menu) / Active Test.
According to the display on the intelligent tester, perform the Active Test.
Tester Display | Test Part | Control Range | Diagnostic Note |
Driver Seat Belt Motor | Driver side seat belt motor | OFF or ON | Driver side seat belt is fastened |
Passenger Seat Belt Motor | Passenger side seat belt motor | OFF or ON | Passenger side seat belt is fastened |
Driver and Passenger Seat Belt Motor | Driver and passenger side seat belt motors | OFF or ON | Driver and passenger side seat belts are fastened |
Tester Display | Test Part | Control Range | Diagnostic Note |
Buzzer | Skid control buzzer sounds | OFF or ON | - |