Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
POWER SEAT SWITCH (w/o Seat Position Memory System) - INSTALLATION
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
| 1. INSTALL FRONT POWER SEAT SWITCH LH |
Install the switch with the 3 screws.
Connect the switch connector.
| 2. INSTALL FRONT SEAT CUSHION SHIELD LH |
for Driver Side:
Connect the connector.
Attach the 2 claws to install the front seat cushion shield LH together with the front inner No. 1 cushion shield LH.
Install the 3 screws.
Connect the 2 rubber bands.
Install the 2 screws.
| 3. INSTALL RECLINING POWER SEAT SWITCH KNOB |
Attach the 2 claws to install the reclining power seat switch knob.
| 4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
Attach the 2 claws to install the slide and vertical power seat switch knob.
| 5. INSTALL FRONT SEAT ASSEMBLY LH |
Install the front seat assembly ().