Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
POWER SEAT SWITCH (w/o Seat Position Memory System) - INSPECTION
| 1. INSPECT FRONT POWER SEAT SWITCH LH |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
- Slide Switch:
Tester Connection Switch Condition Specified Condition 9 (SLD+) - 1 (+B) Front Below 1 Ω 6 (SLD-) - 4 (GND) 9 (SLD+) - 4 (GND) Off 6 (SLD-) - 4 (GND) 9 (SLD+) - 4 (GND) Rear 6 (SLD-) - 1 (+B) - Front Vertical Switch:
Tester Connection Switch Condition Specified Condition 10 (FRV+) - 1 (+B) Up Below 1 Ω 5 (FRV-) - 4 (GND) 10 (FRV+) - 4 (GND) Off 5 (FRV-) - 4 (GND) 10 (FRV+) - 4 (GND) Down 5 (FRV-) - 1 (+B) - Lifter Switch:
Tester Connection Switch Condition Specified Condition 7 (LFT+) - 1 (+B) Up Below 1 Ω 8 (LFT-) - 4 (GND) 7 (LFT+) - 4 (GND) Off 8 (LFT-) - 4 (GND) 7 (LFT+) - 4 (GND) Down 8 (LFT-) - 1 (+B) - Reclining Switch:
Tester Connection Switch Condition Specified Condition 3 (RCL+) - 1 (+B) Front Below 1 Ω 2 (RCL-) - 4 (GND) 3 (RCL+) - 4 (GND) Off 2 (RCL-) - 4 (GND) 3 (RCL+) - 4 (GND) Rear 2 (RCL-) - 1 (+B)
If the result is not as specified, replace the front power seat switch.
| 2. INSPECT FRONT POWER SEAT SWITCH RH |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
- Slide Switch:
Tester Connection Switch Condition Specified Condition 9 (SLD+) - 1 (+B) Front Below 1 Ω 6 (SLD-) - 4 (GND) 9 (SLD+) - 4 (GND) Off 6 (SLD-) - 4 (GND) 9 (SLD+) - 4 (GND) Rear 6 (SLD-) - 1 (+B) - Front Vertical Switch:
Tester Connection Switch Condition Specified Condition 5 (FRV+) - 1 (+B) Up Below 1 Ω 10 (FRV-) - 4 (GND) 5 (FRV+) - 4 (GND) Off 10 (FRV-) - 4 (GND) 5 (FRV+) - 4 (GND) Down 10 (FRV-) - 1 (+B) - Lifter Switch:
Tester Connection Switch Condition Specified Condition 8 (LFT+) - 1 (+B) Up Below 1 Ω 7 (LFT-) - 4 (GND) 8 (LFT+) - 4 (GND) Off 7 (LFT-) - 4 (GND) 8 (LFT+) - 4 (GND) Down 7 (LFT-) - 1 (+B) - Reclining Switch:
Tester Connection Switch Condition Specified Condition 3 (RCL+) - 1 (+B) Front Below 1 Ω 2 (RCL-) - 4 (GND) 3 (RCL+) - 4 (GND) Off 2 (RCL-) - 4 (GND) 3 (RCL+) - 4 (GND) Rear 2 (RCL-) - 1 (+B)
If the result is not as specified, replace the front power seat switch.