Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - METER / GAUGE / DISPLAY
METER / GAUGE SYSTEM - SYSTEM DESCRIPTION
| METER GAUGE AND WARNING/INDICATOR (w/o Multi-information Display) |
| Item | Details |
| Speedometer | Based on a signal received from the wheel speed sensor, the skid control ECU calculates the vehicle speed and transmits data to the combination meter (CAN). |
| Tachometer | The combination meter receives a speed signal from the ECM, and the gauge needle operates (CAN). |
| ODO/TRIP meter | The combination meter receives a vehicle speed pulse integration signal from the skid control ECU, and the ODO/TRIP meter display operates. (CAN) Using the trip meter reset knob, the ODO/TRIP meter display changes. |
| Fuel receiver gauge | The combination meter receives fuel amount information measured by the fuel sender gauge, and the gauge needle operates (Direct line). |
| Engine coolant temperature gauge | The combination meter receives an engine coolant temperature signal from the ECM, and the gauge needle operates (CAN). |
| Oil pressure receiver gauge | The combination meter receives an engine speed signal from the ECM (CAN), and receives an oil pressure sender signal from the oil pressure sender (Direct line). Then the meter measures signals and the gauge needle operates. |
| Voltage meter | Monitors IG voltage and the gauge needle operates (Direct line). |
| Item | Details |
BEAM indicator light | Receives signals from the main body ECU (CAN). |
FRONT FOG indicator light | The indicator turns on when a FRONT FOG illumination command signal is received (CAN). |
REAR FOG indicator light*1 | The indicator turns on when a REAR FOG illumination command signal is received (CAN). |
A/T OIL TEMP warning light*2 | Warning is displayed when the oil temperature is high (CAN). |
A/T P warning light*2 | The indicator turns on when a shift position P signal or transfer neutral switch signal are received (CAN). |
SRS warning light | Receives malfunction signals from the center airbag sensor (CAN). |
KEY indicator light*4 | The indicator turns on when a key not in cabin warning signal is received (CAN). |
DOOR warning light | The open door indicator comes on when a signal is received from the main body ECU (CAN). |
TIRE CARRIER warning light*3 | The indicator turns on based on the TIRE CARRIER illumination command signal (Direct line). |
Driver side seat belt warning light | Receives driver seat belt signals (Unfastened) from the main body ECU (CAN). |
Brake warning light | Comes on when the parking brake switch is on (CAN). Brake fluid level warning switch is on (Direct line). Vehicle stability control system is malfunctioning. |
CHARGE warning light | Receives malfunction signals from the generator (Direct line). |
4LO indicator light | Receives 4LO indicator signals from the four wheel drive control ECU (CAN). |
ABS warning light | Receives malfunction signals from the skid control ECU (CAN). |
MIL | Receives malfunction signals from the ECM (Direct line). |
GLOW indicator light*5 | The indicator turns on when a GLOW indicator signal is received (CAN). |
OIL LEVEL indicator light | The indicator turns on when an oil level signal is received (Direct line). |
FUEL warning light | Receives fuel empty signals from the fuel sender gauge (Direct line). |
FUEL FILTER & SEDIMENTER indicator light*5 | The indicator turns on when a fuel filter clogged malfunction signal is received, or blinks when a fuel sedimenter malfunction signal is received (Direct line). |
SLIP indicator light*6 | Receives malfunction signals from the skid control ECU (CAN). |
VSC OFF indicator light*6 | The VSC OFF indicator turns on when a VSC warning signal is received (CAN). |
Cruise control indicator light*11 | Receives a cruise control on signal or malfunction signal from the ECM (CAN). |
Turn signal indicator light (LH/RH) | Receives a turn signal from the FLASHER relay (Direct line). |
WASHER indicator light | The indicator turns on when a washer fluid level signal is received (Direct line). |
RSCA OFF indicator light*7 | Receives an RSCA OFF signal from the center airbag sensor (Direct line). |
CRAWL indicator light*6 | Receives a CRAWL switch on signal from the skid control ECU (CAN). |
ECT PWR indicator light*2 | Receives an ECT PWR switch on signal from the ECM (CAN). |
2nd START indicator light*2 | Receives a 2nd START switch on signal from the ECM (CAN). |
CENTER differential lock indicator light | Receives a center differential lock switch on signal from the four wheel drive control ECU (CAN). |
REAR differential lock warning light | The indicator turns on when a REAR differential lock indicator signal is received (CAN). |
SPEED LIMIT indicator light | The indicator turns on when a vehicle speed signal is received (CAN). |
Eco driving indicator light | Receives the signals necessary for operation from the ECM and the skid control ECU (CAN). |
SET indicator light*11 | The indicator turns on when a SET indicator signal is received (CAN). |
TRC OFF indicator light*6 | Receives a TRC OFF indicator light signal from the skid control ECU (CAN). |
Turn assist indicator light*6 | Receives a turn assist indicator light signal from the skid control ECU (CAN). |
Multi-terrain select indicator light*10 | Receives a multi-terrain select indicator light signal from the skid control ECU (CAN). |
| A/T P shift position indicator*2 | Receives a P signal from the ECM (CAN). |
| A/T R shift position indicator*2 | Receives an R signal from the ECM (CAN). |
| A/T N shift position indicator*2 | Receives an N signal from the ECM (CAN). |
| A/T D shift position indicator*2 | Receives a D signal from the ECM (CAN). |
| A/T S (1 to 5) shift position indicator*8 | Receives a (1 to 5) signal from the ECM (CAN). |
| A/T S (1 to 6) shift position indicator*9 | Receives a (1 to 6) signal from the ECM (CAN). |
*1: w/ Rear Fog Light
*2: for Automatic Transmission
*3: w/ Tire Carrier
*4: w/ Entry and Start System
*5: for 1VD-FTV
*6: w/ VSC
*7: w/ Curtain Shield Airbag
*8: for A750F Automatic Transmission
*9: for AB60F Automatic Transmission
*10: w/ Multi-terrain Select
*11: w/ Cruise Control System
| METER GAUGE AND WARNING/INDICATOR (w/ Multi-information Display) |
| Item | Details |
| Speedometer | Based on a signal received from the wheel speed sensor, the skid control ECU calculates the vehicle speed and transmits data to the combination meter (CAN). |
| Tachometer | The combination meter receives a speed signal from the ECM, and the gauge needle operates (CAN). |
| ODO/TRIP meter | The combination meter receives a vehicle speed pulse integration signal from the skid control ECU, and the ODO/TRIP meter display operates (CAN). Using the trip meter reset knob, the ODO/TRIP meter display changes. |
| Fuel receiver gauge | The combination meter receives fuel amount information measured by the fuel sender gauge, and the gauge needle operates (Direct line). |
| Engine coolant temperature gauge | The combination meter receives an engine coolant temperature signal from the ECM, and the gauge needle operates (CAN). |
| Oil pressure receiver gauge | The combination meter receives an engine speed signal from the ECM (CAN), and receives an oil pressure sender signal from the oil pressure sender (Direct line). Then the meter measures signals and the gauge needle operates. |
| Voltage meter | Monitors IG voltage and the gauge needle operates (Direct line). |
| Item | Details |
| BEAM indicator light | Receives signals from the main body ECU (CAN). |
| FRONT FOG indicator light | The indicator turns on when a FRONT FOG light illumination signal is received (CAN). |
TAIL LIGHT indicator light | The indicator turns on when a taillight illumination signal is received (CAN). |
| REAR FOG indicator light*1 | The indicator turns on when a REAR FOG light illumination signal is received (CAN). |
| A/T P warning light | The indicator turns on when a shift position P signal or transfer neutral switch signal are received (CAN). |
| SRS warning light | Receives malfunction signals from the center airbag sensor (CAN). |
| DOOR warning light | The open door indicator comes on when a signal is received from the main body ECU (CAN). |
| TIRE CARRIER warning light*2 | The indicator turns on based on the TIRE CARRIER illumination command signal (Direct line). |
| Driver side seat belt warning light | Receives driver seat belt signals (Unfastened) from the main body ECU (CAN). |
| Brake warning light | Comes on when the parking brake switch is on (CAN). Brake fluid level warning switch is on (Direct line). Vehicle stability control system is malfunctioning. |
| CHARGE warning light | Receives malfunction signals from the generator (Direct line). |
| 4LO indicator light | Receives 4LO indicator light signal from the four wheel drive control ECU (CAN). |
| ABS warning light | Receives malfunction signals from the skid control ECU (CAN). |
| MIL | Receives malfunction signals from the ECM (Direct line). |
| GLOW indicator light*3 | The indicator turns on when a GLOW indicator signal is received (CAN). |
| FUEL warning light | Receives fuel empty signals from the fuel sender gauge (Direct line). |
| SLIP indicator light | Receives malfunction signals from the skid control ECU (CAN). |
| Cruise control indicator light*12 | Receives a cruise control on signal or malfunction signal from the ECM (CAN). |
| Turn signal indicator light (LH/RH) | Receives a turn signal from the FLASHER relay (Direct line). |
| RSCA OFF indicator light*4 | Receives an RSCA OFF signal from the center airbag sensor (Direct line). |
Master warning light | Receives a warning signal from each sensor and ECU (Direct line and CAN). |
| CRAWL indicator light | Receives a CRAWL switch on signal from the skid control ECU (CAN). |
| ECT PWR indicator light | Receives an ECT PWR switch on signal from the ECM (CAN). |
| 2nd START indicator light | Receives a 2nd START switch on signal from the ECM (CAN). |
| Center Differential Lock indicator light | Receives a center differential lock switch on signal from the four wheel drive control ECU (CAN). |
| Rear Differential Lock warning light*5 | The indicator turns on when a REAR differential lock indicator signal is received (CAN). |
| SPEED LIMIT indicator light | The indicator turns on when a vehicle speed signal is received (CAN). |
PCS indicator light*6 | Receives a PCS indicator light signal from the seat belt control ECU (CAN). |
Power steering warning light | Receives a power steering warning light signal from the power steering ECU (CAN). |
| VSC OFF indicator light | Receives a VSC OFF indicator light signal from the skid control ECU (CAN). |
| Eco driving indicator light | Receives the signals necessary for operation from the ECM and the skid control ECU (CAN). |
| SET indicator light*12 | The indicator turns on when a SET indicator signal is received (CAN). |
Radar cruise control indicator light*9 | The indicator turns on when a radar cruise control indicator signal is received (CAN). |
| Turn assist indicator light | Receives a turn assist indicator light signal from the skid control ECU (CAN). |
| Multi-terrain select indicator light*13 | Receives a multi-terrain select indicator light signal from the skid control ECU (CAN). |
Headlight beam level control system warning light | Receives a headlight beam level control system warning light signal from the headlight leveling ECU (Direct line).*10 Receives a headlight beam level control system warning light signal from the headlight swivel ECU (CAN).*11 |
Automatic high beam indicator light*14 | Receives automatic high beam indicator signals from the main body ECU (CAN). |
Tire pressure warning light*15 | Receives a low tire pressure signal from the tire pressure warning ECU (CAN). |
| A/T P shift position indicator | Receives a P signal from the ECM (CAN). |
| A/T R shift position indicator | Receives an R signal from the ECM (CAN). |
| A/T N shift position indicator | Receives an N signal from the ECM (CAN). |
| A/T D shift position indicator | Receives a D signal from the ECM (CAN). |
| A/T S (1 to 5) shift position indicator*7 | Receives a (1 to 5) signal from the ECM (CAN). |
| A/T S (1 to 6) shift position indicator*8 | Receives a (1 to 6) signal from the ECM (CAN). |
*1: w/ Rear Fog Light
*2: w/ Tire Carrier
*3: for 1VD-FTV
*4: w/ Curtain Shield Airbag
*5: w/ Rear Differential Lock
*6: w/ Pre-crash Safety System
*7: for A750F Automatic Transmission
*8: for AB60F Automatic Transmission
*9: w/ Dynamic Radar Cruise Control System
*10: w/ Static Headlight Auto Leveling
*11: w/ Dynamic Headlight Auto Leveling
*12: w/ Cruise Control System
*13: w/ Multi-terrain Select
*14: w/ Automatic High Beam System
*15: w/ Tire Pressure Warning System
| MULTI-INFORMATION DISPLAY (w/ Multi-information Display) |
When the DISP switch is pressed, the multi-information display is changed between the following: cruise information display and warning display.
Basic Flowchart.
| ECO DRIVING INDICATOR LIGHT SETTING |
- HINT:
The eco driving indicator light can be deactivated by changing the setting.
When the eco driving indicator light is deactivated, the indicator and warning light check is not performed.
Setting eco driving indicator light.
Display the odometer screen.
Press and hold the ODO/TRIP switch for five seconds or more to display the settings screen.
w/o Multi-information Display:
After selecting "Eco On" or "EcoOFF", press and hold the ODO/TRIP switch for 2 seconds or more to exit the settings screen.
w/ Multi-information Display:
After selecting "ON" or "OFF", press and hold the ODO/TRIP switch for 2 seconds or more to exit the settings screen.