DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK FOR DTC
PERFORM ACTIVE TEST USING INTELLIGENT TESTER (FUEL RECEIVER GAUGE ASSEMBLY)
METER / GAUGE SYSTEM - Fuel Receiver Gauge Malfunction
DESCRIPTION
The fuel sender gauge has a variable resistance mechanism. The resistance decreases when the fuel amount increases, and the resistance increases when the fuel amount decreases. The fuel receiver gauge changes based on the resistance of the fuel sender gauge.
WIRING DIAGRAM
INSPECTION PROCEDURE
Check for DTCs ().
Result| Result | Proceed to |
| DTC B1500 or B1501 is not output | A |
| DTC B1500 is output | B |
| DTC B1501 is output | C |
| 2.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (FUEL RECEIVER GAUGE ASSEMBLY) |
Operate the intelligent tester according to the steps on the display and select Active Test ().
Combination Meter| Tester Display | Test Part | Control Range | Diagnostic Note |
| Fuel Meter Operation | Fuel receiver gauge | EMPTY, 1/2 or FULL | Perform the test with the vehicle stopped and engine idling. |
- OK:
- Needle indication is normal.
Result| Result | Proceed to |
| OK | A |
| NG (w/ Multi-information Display) | B |
| NG (w/o Multi-information Display) | C |
| | REPLACE COMBINATION METER ASSEMBLY ()
|
|
|
| | REPLACE COMBINATION METER ASSEMBLY ()
|
|
|
| A | |
| |
| PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE ()
|
|