LUMBAR SWITCH (for Manual Seat) - INSTALLATION

Use the same procedure for RHD and LHD vehicles.

The procedure listed below is for LHD vehicles.

1. INSTALL LUMBAR SWITCH (w/ Lumbar Support)

Install the switch with the 2 screws.

2. INSTALL FRONT SEAT CUSHION SHIELD LH

w/ Lumbar Support:

Connect the lumbar switch connector.

for 4 Way Seat Type:

Attach the 3 claws in the order shown in the illustration to install the front seat cushion shield LH.

Install the 2 screws.

for 8 Way Seat Type:

Attach the 3 claws in the order shown in the illustration to install the front seat cushion shield LH.

Install the 3 screws.

w/ Seatback Board:

Connect the 2 rubber bands to the 2 hooks.

w/o Seatback Board:

Connect the rubber band to the 2 hooks.

3. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

Attach the claw to install the reclining adjuster release handle LH.

4. INSTALL VERTICAL SEAT ADJUSTER KNOB (for 8 Way Seat Type)

Install the snap ring to the vertical seat adjuster knob.

Install the vertical seat adjuster knob.

5. INSTALL VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat Type)

Install the vertical adjusting handle with the 2 screws.

6. INSTALL VERTICAL ADJUSTER COVER LH (for 8 Way Seat Type)

Attach the 2 claws to install the vertical adjuster cover LH.

7. INSTALL FRONT SEAT ASSEMBLY LH

Install the front seat assembly ().