Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - METER / GAUGE / DISPLAY
LIGHT CONTROL RHEOSTAT - INSPECTION
| 1. INSPECT LIGHT CONTROL RHEOSTAT |
Inspect the light control rheostat.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 6 (TC) - 1 (E) TAIL cancel switch off → on 10 kΩ or higher → Below 1 Ω 5 (T) - 1 (E) Always 10 kΩ or higher 7 (TR) - 1 (E) Light control rheostat fully turned right → fully turned left 10 kΩ or higher → Below 100 Ω
Inspect the trip switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 4 (A/B) - 1 (E) Trip switch on (Pushed) Below 200 Ω Trip switch off (Not Pushed) 1 MΩ or higher
If the result is not as specified, replace the rheostat.