Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - MIRROR INT
INNER REAR VIEW MIRROR - INSPECTION
| 1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System) |
Check operation of the electrochromic inner mirror.
| *1 | Black Colored Tape | - | - |
| *a | Component without harness connected Inner Rear View Mirror Assembly | - | - |
Connect the battery positive (+) lead to terminal 1(IG) and the negative (-) lead to terminal 2(E).
Attach black colored tape to the forward sensor to prevent it from sensing.
Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.
- HINT:
- When the environment is very bright, the antiglare operation may occur immediately after the tape is applied. If the result is not as specified, replace the inner rear view mirror assembly.
| 2. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System) |
Check operation of the electrochromic inner mirror.
| *1 | Black Colored Tape | - | - |
| *a | Component without harness connected Inner Rear View Mirror Assembly | - | - |
Connect the battery positive (+) lead to terminal 1(IG) and the negative (-) lead to terminal 2(E).
Attach black colored tape to the forward sensor to prevent it from sensing.
Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.
- HINT:
- When the environment is very bright, the antiglare operation may occur immediately after the tape is applied. If the result is not as specified, replace the inner rear view mirror assembly.