Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING INT
IGNITION KEY CYLINDER LIGHT - INSTALLATION
- HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
| 1. INSTALL TRANSPONDER KEY AMPLIFIER |
Connect the connector.
Align the claw of the transponder key amplifier with the upper bracket.
Push in the transponder key amplifier and install it to the upper bracket.
- NOTICE:
- Do not push in the transponder key amplifier with excessive force as it may be damaged.
| 2. INSTALL UPPER STEERING COLUMN COVER |
Attach the claw to install the upper steering column cover.
Attach the 4 clips to install the upper steering column cover onto the instrument cluster finish panel.
| 3. INSTALL LOWER STEERING COLUMN COVER |
Attach the 2 claws to install the lower steering column cover.
- NOTICE:
- Do not damage the tilt and telescopic switch.
Install the 3 screws.
- Torque:
- 2.0 N*m{ 20 kgf*cm, 18 in.*lbf}