Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT BELT
FRONT SEAT OUTER BELT ASSEMBLY (for Bench Seat Type) - REMOVAL
- HINT:
1. REMOVE FRONT SEAT ASSEMBLY RH |
()
2. REMOVE FRONT DOOR SCUFF PLATE LH |
Detach the 7 claws and 4 clips, and remove the scuff plate.
3. REMOVE REAR STEP COVER |
- HINT:
- Use the same procedure to remove the step cover on the other side.
Detach the 2 claws and remove the step cover.
4. REMOVE REAR DOOR SCUFF PLATE LH |
Remove the screw.
Detach the 3 claws and 4 clips, and remove the scuff plate.
5. REMOVE CENTER PILLAR GARNISH COVER LH |
- HINT:
When removing the center pillar garnish cover, move the front seat and seatback to the foremost upright position.
When removing the center pillar garnish cover, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.
After moving the front seat, disconnect the cable from the negative (-) battery terminal.
Detach the 2 clips and 2 guides, and remove the cover.
6. REMOVE CENTER LOWER PILLAR GARNISH LH |
- HINT:
Remove the bolt and seat belt anchor.
Detach the 3 claws and 6 clips, and remove the center lower pillar garnish LH.
7. REMOVE REAR ASSIST GRIP ASSEMBLY |
- HINT:
- Use the same procedure to remove the rear assist grip on the other side.
Detach the 4 claws and remove the 2 assist grip plugs.
Remove the 2 bolts.
Detach the 2 claws and remove the rear assist grip.
8. REMOVE CENTER PILLAR GARNISH LH |
Remove the bolt.
Detach the 2 clips and 2 guides.
Pass the seat belt anchor through the center pillar garnish, and remove the center pillar garnish.
9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH |
Remove the nut and shoulder anchor.
Remove the bolt and front seat outer belt assembly LH.
10. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY |
Remove the 2 bolts and front shoulder belt anchor adjuster assembly.
11. REMOVE FRONT SEAT OUTER LAP BELT SUB-ASSEMBLY |
Remove the bolt and front seat outer lap belt sub-assembly.