Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
FRONT SEAT CUSHION HEATER - REMOVAL
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
| 1. REMOVE FRONT SEAT ASSEMBLY LH |
()
| 2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
Apply protective tape as shown in the illustration.
| *1 | Protective Tape |
Using a screwdriver, detach the 2 claws and remove the slide and vertical power seat switch knob.
- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE RECLINING POWER SEAT SWITCH KNOB |
Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.
| *1 | Protective Tape |
- HINT:
- Tape the screwdriver tip before use.
| 4. REMOVE FRONT SEAT CUSHION SHIELD LH |
Remove the 2 screws.
Disconnect the 2 rubber bands.
Remove the 3 screws.
Detach the 2 claws and remove the front seat cushion shield LH together with the front inner No. 1 seat cushion shield LH.
for Driver Side:
Disconnect the connector.
| 5. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH |
Disconnect the connectors and detach the clamps.
Remove the nut and front seat inner belt assembly.
Remove the front seat belt anchor plate.
| 6. REMOVE FRONT INNER SEAT CUSHION SHIELD LH |
Remove the screw.
Detach the 2 claws and clip, and then remove the front inner seat cushion shield LH.
| 7. REMOVE FRONT POWER SEAT SWITCH LH |
w/ Seat Position Memory System:
Disconnect the 2 connectors.
w/o Seat Position Memory System:
Disconnect the connector.
Remove the 3 screws and front power seat switch LH.
| 8. REMOVE SEAT CUSHION COVER WITH PAD |
Using a clip remover, remove the 2 clips.
w/o Climate Control Seat System:
Disconnect the connector and detach the 2 wire harness clamps.
Disconnect the connector and detach the wire harness clamp.
w/ Climate Control Seat System:
Disconnect the 2 connectors and detach the 4 wire harness clamps.
Detach the wire harness clamp.
for Front Passenger Side:
Disconnect the connector.
Detach the 2 clamps and remove the connector holder.
Bend the 2 seat frame claws upward.
Detach the hooks and remove the seat cushion cover with pad.
| 9. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER |
Remove the hog rings and front separate type seat cushion cover from the front separate type seat cushion pad.
| 10. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH |
w/o Climate Control Seat System:
Cut off the tack pins and remove the front seat cushion heater assembly LH from the front separate type seat cushion cover.
w/ Climate Control Seat System:
Cut off the tack pins and remove the front seat cushion heater assembly LH from the front separate type seat cushion cover.