Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
FRONT SEAT CUSHION HEATER - INSTALLATION
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
| 1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH |
Set the front seat cushion heater assembly LH with the name stamp side facing the front separate type seat cushion cover.
w/o Climate Control Seat System:
Install the front seat cushion heater assembly LH to the front separate type seat cushion cover with new tack pins.
| *1 | Tack Pin | *2 | Front Separate Type Seat Cushion Cover |
| *3 | Front Seat Cushion Heater Assembly LH | *4 | Name Stamp |
w/ Climate Control Seat System:
Install the front seat cushion heater assembly LH to the front separate type seat cushion cover with new tack pins.
| *1 | Tack Pin | *2 | Front Separate Type Seat Cushion Cover |
| *3 | Front Seat Cushion Heater Assembly LH | *4 | Name Stamp |
| 2. INSTALL FRONT SEPARATE TYPE SEAT CUSHION COVER |
Using hog ring pliers, install the front separate type seat cushion cover to the front separate type seat cushion pad with new hog rings.
| *1 | Hog Ring Pliers |
- NOTICE:
| 3. INSTALL SEAT CUSHION COVER WITH PAD |
Set the seat cushion cover with pad in place.
Attach the hooks to install the seat cushion cover with pad.
Bend the 2 seat frame claws downward.
for Front Passenger Side:
Attach the 2 clamps to connect the connector holder.
Connect the connector.
w/o Climate Control Seat System:
Connect the connector and attach the wire harness clamp.
Connect the connector and attach the 2 wire harness clamps.
w/ Climate Control Seat System:
Attach the wire harness clamp.
Connect the 2 connectors and attach the 4 wire harness clamps.
Install the 2 clips.
| 4. INSTALL FRONT POWER SEAT SWITCH LH |
Install the front power seat switch LH with the 3 screws.
w/ Seat Position Memory System:
Connect the 2 connectors.
w/o Seat Position Memory System:
Connect the connector.
| 5. INSTALL FRONT INNER SEAT CUSHION SHIELD LH |
Attach the 2 claws and clip to install the front inner seat cushion shield LH.
Install the screw.
| 6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH |
Install the front seat belt anchor plate.
Install the front seat inner belt assembly with the nut.
- Torque:
- 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
- NOTICE:
- Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.
Connect the connectors and attach the clamps.
| 7. INSTALL FRONT SEAT CUSHION SHIELD LH |
for Driver Side:
Connect the connector.
Attach the 2 claws to install the front seat cushion shield LH together with the front inner No. 1 cushion shield LH.
Install the 3 screws.
Connect the 2 rubber bands.
Install the 2 screws.
| 8. INSTALL RECLINING POWER SEAT SWITCH KNOB |
Attach the 2 claws to install the reclining power seat switch knob.
| 9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
Attach the 2 claws to install the slide and vertical power seat switch knob.
| 10. INSTALL FRONT SEAT ASSEMBLY LH |
()