INSTALL FRONT SEAT ASSEMBLY LH

INSTALL REAR INNER SEAT TRACK BRACKET COVER LH

INSTALL REAR OUTER FRONT SEAT TRACK COVER LH

INSTALL FRONT INNER SEAT TRACK BRACKET COVER LH

INSTALL FRONT OUTER SEAT TRACK BRACKET COVER LH

INSTALL FRONT SEAT HEADREST ASSEMBLY

CHECK SRS WARNING LIGHT (w/ Front Seat Side Airbag)

INSPECT FRONT SEAT ASSEMBLY (w/ Lumbar Support)

Place the front seat assembly LH in the cabin.

• NOTICE:

• Be careful not to damage the vehicle body.

w/ Wire Harness:

Connect the connectors under the front seat assembly LH.

Temporarily install the front seat assembly LH with the 4 bolts.

Operate the seat track adjusting handle to move the front seat assembly LH to the rearmost position.

Tighten the bolts in the order indicated in the illustration.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

Operate the seat track adjusting handle to move the front seat assembly LH to the foremost position.

Tighten the bolts in the order indicated in the illustration.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

w/ Front Seat Side Airbag:

Connect the cable to the negative (-) battery terminal.

• NOTICE:

• When disconnecting the cable, some systems need to be initialized after the cable is reconnected ()

for Power Tilt and Power Telescopic Steering Column:

Restore the Autoaway/Return function setting to the previous condition by changing the customize parameter ()

Attach the 3 claws to install the rear inner seat track bracket cover LH.

Attach the 3 claws to install the rear outer front seat track cover LH.

Attach the 2 claws to install the front inner seat track bracket cover LH.

Attach the 2 claws to install the front outer seat track bracket cover LH.

Install the front seat headrest assembly.

Check the lumbar support operation.