FRONT SEAT ASSEMBLY (for Bench Seat Type) - REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

Use the same procedure for RHD and LHD vehicles.

The procedure listed below is for LHD vehicles.

1. REMOVE FRONT SEAT HEADREST ASSEMBLY

Remove the front seat headrest assembly.

2. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER RH

Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.

Front Seat Assembly (For Bench Seat Type) - Removal. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 4 claws and remove the front seat outer track bracket cover RH.

3. REMOVE FRONT SEAT INNER TRACK BRACKET COVER RH

Detach the 4 claws and remove the front seat inner track bracket cover RH.

4. REMOVE FRONT SEAT OUTER TRACK COVER RH

Operate the seat track adjusting handle and move the front seat assembly RH to the foremost position.

Detach the 2 claws and clip.

Detach the 2 guides and remove the front seat outer track cover RH.

5. REMOVE FRONT SEAT INNER TRACK COVER RH

Detach the 2 claws and clip.

Detach the 2 guides and remove the front seat inner track cover RH.

6. REMOVE FRONT SEAT ASSEMBLY RH

Remove the 2 bolts.

Pull out the front seat lap type belt assembly through the hole of the front seat cushion.

Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.

Remove the 2 bolts.

Operate the seat track adjusting handle and move the front seat assembly RH to the center position, and then operate the reclining adjusting handle and move the front seatback to the upright position.

Remove the front seat assembly RH from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.

SEAT

Land Cruiser URJ200 URJ202 GRJ200 VDJ200

FRONT SEAT ASSEMBLY for Bench Seat Type