Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
FRONT SEAT ASSEMBLY (for Bench Seat Type) - INSTALLATION
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
1. INSTALL FRONT SEAT ASSEMBLY RH |
Place the front seat assembly RH in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Temporarily install the front seat assembly RH with the 4 bolts.
Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.
Tighten the 2 bolts in the order shown in the illustration.
- Torque:
- 37 N*m{ 377 kgf*cm, 27 ft.*lbf}
Operate the seat track adjusting handle and move the front seat assembly RH to the foremost position.
Tighten the 2 bolts in the order shown in the illustration.
- Torque:
- 37 N*m{ 377 kgf*cm, 27 ft.*lbf}
Pass the front seat lap type belt assembly through the hole of the front seat cushion to the surface.
2. INSTALL FRONT SEAT INNER TRACK COVER RH |
Attach the 2 guides.
Attach the 2 claws and clip to install the front seat inner track cover RH.
3. INSTALL FRONT SEAT OUTER TRACK COVER RH |
Attach the 2 guides.
Attach the 2 claws and clip to install the front seat outer track cover RH.
4. INSTALL FRONT SEAT INNER TRACK BRACKET COVER RH |
Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.
Attach the 4 claws to install the front seat inner track bracket cover RH.
5. INSTALL FRONT SEAT OUTER TRACK BRACKET COVER RH |
Attach the 4 claws to install the front seat outer track bracket cover RH.
6. INSTALL FRONT SEAT HEADREST ASSEMBLY |
Install the front seat headrest assembly.