Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
FRONT POWER SEAT MOTOR ASSEMBLY (for Power Seat) - ON-VEHICLE INSPECTION
| 1. INSPECT POWER SEAT MOTOR ASSEMBLY |
Check the PTC operation inside the power seat motor.
- HINT:
- The resistance of the PTC thermistor increases when the power seat switch is held down even after the power seat has been moved to the maximum in one direction. If the resistance increases beyond a specified level, current is cut to prevent a short circuit.
- NOTICE:
The inspection should be performed with the seat installed in the vehicle.
Perform the 4 steps below for each power seat function.
Choose a power seat function. Operate the power seat switch and move the seat as much as possible in one direction. Keep the seat in that position for approximately 60 seconds.
Operate the power seat switch again and continue to try to move the seat in the same direction as in the previous step. Measure the amount of time elapsed before current is automatically cut (the sound of the motor has stopped).
- Standard:
- 4 to 90 seconds
After current has been cut, release the power seat switch and wait for approximately 60 seconds.
Operate the same power seat switch and move the seat in the opposite direction. Check that the motor operates.