Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
FRONT POWER SEAT CONTROL SYSTEM (w/ Seat Position Memory System) - HOW TO PROCEED WITH TROUBLESHOOTING
- HINT:
Use the following procedures to troubleshoot the front power seat control system.
*: Use the intelligent tester.
1.VEHICLE BROUGHT TO WORKSHOP |
|
2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
|
3.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
Use the intelligent tester to check if the CAN communication system is functioning normally.
Result | Proceed to |
CAN DTC is not output | A |
CAN DTC is output (for LHD) | B |
CAN DTC is output (for RHD) | C |
|
| ||||
|
| ||||
|
4.PROBLEM SYMPTOMS TABLE |
Refer to the Problem Symptoms Table ().
Result | Proceed to |
Fault is not listed in problem symptoms table | A |
Fault is listed in problem symptoms table | B |
|
| ||||
|
5.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Data List / Active Test ()
Terminals of ECU ()
Operation Check ()
|
6.REPAIR OR REPLACE |
|
7.CONFIRMATION TEST |
| ||||
|
---|