Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUPPLEMENTAL RESTRAINT SYSTEMS
FRONT PASSENGER AIRBAG ASSEMBLY - REMOVAL
- HINT:
Use the same procedures for the RHD and LHD.
The procedures listed below are the LHD side.
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
After the ignition switch is turned off, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch off, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 2. REMOVE INSTRUMENT PANEL SAFETY PAD |
Remove the instrument panel safety pad ().
| 3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY |
Detach the claw and remove the wire.
Disconnect the 2 connectors and remove the instrument panel wire from the front passenger airbag.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 2 screws.
Detach the 5 hooks (A).
Detach the 5 hooks (B) and remove the front passenger airbag from the instrument panel.