Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUPPLEMENTAL RESTRAINT SYSTEMS
FRONT PASSENGER AIRBAG ASSEMBLY - INSTALLATION
- HINT:
Use the same procedures for the RHD and LHD.
The procedures listed below are the LHD side.
| 1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY |
Attach the 5 hooks (A).
Attach the 5 hooks (B) to install the front passenger airbag on the instrument panel.
Install the 2 screws.
Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Attach the claw and install the wire.
| 2. INSTALL INSTRUMENT PANEL SAFETY PAD |
Install the instrument panel safety pad ().
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 4. CHECK SRS WARNING LIGHT |
Check the SRS warning light ().