Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK
FRONT DOOR LOCK - INSPECTION
| 1. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Double Locking System) |
Check the door lock motor operation.
Apply battery voltage to the motor connector and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)Unlock
Check the detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 8 (LSSR) - 7 (E) Lock 10 kΩ or higher 8 (LSSR) - 7 (E) Unlock Below 1 Ω
for LHD:
Check the door lock and unlock switch.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 9 (L) - 7 (E) Lock Below 1 Ω 9 (L) - 7 (E)
10 (UL) - 7 (E)OFF 10 kΩ or higher 10 (UL) - 7 (E) Unlock Below 1 Ω
| 2. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Double Locking System) |
Check the door lock motor operation.
Apply battery voltage to the motor connector and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 3 (UL)Lock Battery positive (+) → 3 (UL)
Battery negative (-) → 4 (L)Unlock Battery positive (+) → 2 (DL)
Battery negative (-) → 1 (UNDL)Set Battery positive (+) → 1 (UNDL)
Battery negative (-) → 2 (DL)Unset
Check the detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 8 (LSSR) - 7 (E) Lock 10 kΩ or higher 8 (LSSR) - 7 (E) Unlock Below 1 Ω
for LHD:
Check the door lock and unlock switch.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 9 (L) - 7 (E) Lock Below 1 Ω 9 (L) - 7 (E)
10 (UL) - 7 (E)OFF 10 kΩ or higher 10 (UL) - 7 (E) Unlock Below 1 Ω
| 3. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Double Locking System) |
Check the door lock motor operation.
Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)Unlock
Check the detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 7 (LSSR) - 8 (E) Lock 10 kΩ or higher 7 (LSSR) - 8 (E) Unlock Below 1 Ω
for RHD:
Check the door lock and unlock switch.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 9 (L) - 7 (E) Lock Below 1 Ω 9 (L) - 7 (E)
10 (UL) - 7 (E)OFF 10 kΩ or higher 10 (UL) - 7 (E) Unlock Below 1 Ω
| 4. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Double Locking System) |
Check the door lock motor operation.
Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 2 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 2 (L)Unlock Battery positive (+) → 4 (DL)
Battery negative (-) → 3 (UNDL)Set Battery positive (+) → 3 (UNDL)
Battery negative (-) → 4 (DL)Unset
Check the detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 7 (LSSR) - 8 (E) Lock 10 kΩ or higher 7 (LSSR) - 8 (E) Unlock Below 1 Ω
for RHD:
Check the door lock and unlock switch.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 6 (L) - 8 (E) Lock Below 1 Ω 6 (L) - 8 (E)
5 (UL) - 8 (E)OFF 10 kΩ or higher 5 (UL) - 8 (E) Unlock Below 1 Ω