Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - INTERIOR PANELS / TRIM
FRONT CONSOLE BOX (w/o Console Box Lid) - REMOVAL
- HINT:
| 1. REMOVE FRONT SEAT ASSEMBLY RH |
()
| 2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Put protective tape around the No. 2 instrument panel finish panel cushion.
| *1 | Protective Tape |
Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.
| 3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
Remove the clip and screw.
Detach the 8 claws.
Disconnect the connectors, detach the 2 clamps and remove the lower instrument panel pad sub-assembly.
| 4. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
Put protective tape around the No. 1 instrument panel finish panel cushion.
| *1 | Protective Tape |
Using a moulding remover, detach the 7 claws and remove the No. 1 instrument panel finish panel cushion.
| 5. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
Remove the clip and screw.
Detach the 7 claws and remove the lower instrument panel pad sub-assembly.
| 6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Detach the 7 claws.
Disconnect the connectors and remove the lower center instrument cluster finish panel sub-assembly.
| 7. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH |
Put protective tape around the upper No. 2 console panel garnish.
Using a screwdriver, detach the 8 claws and remove the upper No. 2 console panel garnish.
- HINT:
- Tape the screwdriver tip before use.
| *A | for Separate Seat Type | *B | for Bench Seat Type |
| *1 | Protective Tape | - | - |
| 8. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH |
Put protective tape around the upper No. 1 console panel garnish.
Using a screwdriver, detach the 8 claws and remove the upper No. 1 console panel garnish.
- HINT:
- Tape the screwdriver tip before use.
| *1 | Protective Tape |
| 9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Put protective tape around the rear upper console panel sub-assembly.
Using a moulding remover, detach the 12 claws and remove the rear upper console panel sub-assembly.
| *1 | Protective Tape | - | - |
| 10. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.
| 11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Put protective tape around the upper console panel sub-assembly.
Using a moulding remover, detach the 8 claws and remove the upper console panel sub-assembly.
| 12. REMOVE LOWER CONSOLE BOX |
Remove the 2 screws and 4 bolts.
Detach the 2 claws and remove the lower console box.