Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - INTERIOR PANELS / TRIM
FRONT CONSOLE BOX (w/ Cool Box) - DISASSEMBLY
| 1. REMOVE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Air Conditioning System) |
Remove the 4 screws.
Detach the 5 claws and remove the air conditioning control.
| 2. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Cooler) |
Remove the 4 screws.
Detach the 5 claws and remove the air conditioning control.
| 3. REMOVE REAR COOLER SWITCH HOLE COVER (w/o Rear Cooler) |
Remove the 4 screws.
Detach the 5 claws and remove the hole cover.
| 4. REMOVE INSTRUMENT PANEL HOLE COVER |
Remove the 2 screws.
Detach the 7 claws and remove the hole cover.
| 5. REMOVE REAR CONSOLE BOX MOUNTING BRACKET |
Remove the 4 screws and bracket.
| 6. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY |
Remove the 6 screws and door.
| 7. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY |
Remove the 12 screws, lower box and door lock.
| 8. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY |
Using a moulding remover, detach the 12 claws and remove the inner door.
Remove the 4 screws and door hinge.
| 9. REMOVE CONSOLE COMPARTMENT DOOR LOCK |
Remove the 2 screws and door lock.
| 10. REMOVE COOLING BOX ASSEMBLY |
Remove the 4 screws.
Detach the 10 claws and remove the cooling box.
| 11. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY |
Disconnect the connector.
Remove the screw and amplifier.
| 12. REMOVE COOLER CONTROL SWITCH SUB-ASSEMBLY |
Detach the 2 claws.
Disconnect the connector and remove the switch.
| 13. REMOVE NO. 2 COOLING BOX BRACKET |
Remove the 2 screws and mounting bracket.
Remove the 2 screws and bracket.
| 14. REMOVE COOLING BOX BRACKET |
Remove the 2 screws and mounting bracket.
Remove the 2 screws and bracket.
| 15. REMOVE COOLING BOX BASE |
Remove the 10 screws and cooling box base.
| 16. REMOVE COOLING UNIT CASE SUB-ASSEMBLY |
Remove the 2 screws and air duct from the case.
| 17. REMOVE LIQUID HOSE |
Remove the bolt and liquid hose.
Remove the O-ring from the liquid hose.
| 18. REMOVE LOWER COOLING UNIT CASE SUB-ASSEMBLY |
Remove the screw.
Disconnect the 3 connectors.
Remove the 4 holding springs and lower cooling unit case.
| 19. REMOVE UPPER COOLING UNIT CASE |
Remove the cooling unit case.
Detach the 2 hooks and open the case, as shown in the illustration.
| 20. REMOVE NO. 3 COOLER THERMISTOR |
Remove the cool box insulator.
Remove the thermistor.
| 21. REMOVE NO. 1 COOLER BLOWER MOTOR SUB-ASSEMBLY |
Remove the 2 screws.
Detach the 4 claws and remove the blower motor.
| 22. REMOVE NO. 2 COOLER EVAPORATOR SUB-ASSEMBLY |
Remove the evaporator.