Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUPPLEMENTAL RESTRAINT SYSTEMS
FRONT AIRBAG SENSOR - REMOVAL
- HINT:
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 2. REMOVE HEADLIGHT ASSEMBLY |
Remove the headlight assembly ().
| 3. REMOVE FRONT AIRBAG SENSOR |
Remove the nut and front airbag sensor from the body.
Disconnect the connector.