Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - THEFT DETERRENT / KEYLESS ENTRY
ENGINE HOOD COURTESY SWITCH - REMOVAL
- HINT:
Use the same procedure for LHD and RHD vehicles.
The procedures listed below its for LHD vehicles.
| 1. REMOVE UPPER RADIATOR SUPPORT SEAL |
()
| 2. REMOVE RADIATOR GRILLE ASSEMBLY |
Put protective tape around the radiator grille assembly.
| *1 | Protective Tape |
Remove the 3 screws.
Detach the 2 clips and 8 claws, and remove the radiator grille assembly.
w/ Wide View Front Monitor System:
Disconnect the connector.
| 3. REMOVE HOOD LOCK CONTROL CABLE COVER |
Remove the 3 screws.
Detach the claw and remove the cover.
| 4. REMOVE HOOD LOCK ASSEMBLY |
Remove the hood lock nut cap.
Remove the 2 bolts and nut.
Disconnect the connector.
Disconnect the hood lock control cable and remove the hood lock.