Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - THEFT DETERRENT / KEYLESS ENTRY
ELECTRICAL KEY OSCILLATOR (for Rear Floor) - REMOVAL
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type) |
Remove the rear No. 2 seat assembly LH ().
| 4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type) |
Remove the rear No. 2 seat assembly RH ().
| 5. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type) |
Remove the rear No. 2 seat assembly LH ().
| 6. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type) |
Remove the rear No. 2 seat assembly RH ().
| 7. REMOVE REAR NO. 1 SEAT ASSEMBLY LH |
Remove the rear No. 1 seat assembly LH ().
| 8. REMOVE REAR NO. 1 SEAT ASSEMBLY RH |
Remove the rear No. 1 seat assembly RH ().
| 9. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH |
Remove the front quarter trim panel assembly LH ().
| 10. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH |
Remove the front quarter trim panel assembly LH ().
| 11. REMOVE REAR NO. 1 SEAT PROTECTOR |
Detach the 10 claws and remove the 2 seat protectors.
| 12. REMOVE REAR NO. 2 SEAT PROTECTOR |
Detach the 10 claws and remove the 2 seat protectors.
| 13. REMOVE INDOOR ELECTRICAL KEY OSCILLATOR |
Fold back the front floor carpet assembly.
Disconnect the connector.
Detach the 2 claws and remove the electrical key oscillator.