ELECTRICAL KEY OSCILLATOR (for Rear Floor) - INSTALLATION

1. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR

Attach the 2 claws to install the electrical key oscillator.

Connect the connector.

Install the front floor carpet assembly.

2. INSTALL REAR NO. 2 SEAT PROTECTOR

Attach the 10 claws to install the 2 seat protectors.

3. INSTALL REAR NO. 1 SEAT PROTECTOR

Attach the 10 claws to install the 2 seat protectors.

4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

Install the front quarter trim panel assembly LH ().

5. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

Install the front quarter trim panel assembly RH ().

6. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

Install the rear No. 1 seat assembly LH ().

7. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

Install the rear No. 1 seat assembly RH ().

8. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type)

Install the rear No. 2seat assembly LH ().

9. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

Install the rear No. 2seat assembly RH ().

10. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type)

Install the rear No. 2 seat assembly LH ().

11. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

Install the rear No. 2 seat assembly RH ().

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().

13. CHECK SRS WARNING LIGHT

Check the SRS warning light ().