ELECTRICAL KEY OSCILLATOR (for Outside Luggage Compartment) - INSTALLATION

1. INSTALL ELECTRICAL KEY ANTENNA

Install the antenna with the 2 screws.

2. INSTALL REAR BUMPER ARM BRACKET LH

Install the rear bumper arm bracket LH with the 2 bolts.

Connect the connector.

3. INSTALL REAR BUMPER COVER

For the rear bumper cover with tire carrier, use the procedures described below.

w/ TOYOTA Parking Assist-sensor System or w/ Rear Fog Light:

Connect the No. 2 frame wire connector.

Attach the 14 claws to install the rear bumper cover.

Install the 7 bolts, 6 screws and 2 clips.

Open the tail gate and install the 4 clips.

Close the tail gate.

4. INSTALL REAR NO. 1 BUMPER PLATE

Attach the 20 claws to install the rear No. 1 bumper plate.

5. INSTALL REAR QUARTER PANEL MUDGUARD LH

Install the mudguard with the clip.

Using a T30 "TORX" socket, install the 6 screws.

6. INSTALL REAR QUARTER PANEL MUDGUARD RH

Install the mudguard with the clip.

Using a T30 "TORX" socket, install the 7 screws.

7. INSTALL SPARE WHEEL CARRIER SUB-ASSEMBLY (w/ Tire Carrier)

Install the spare wheel carrier sub-assembly ().

8. INSTALL PINTLE HOOK ASSEMBLY (w/ Pintle Hook)

Install the pintle hook assembly ().