Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - HEATING / AIR CONDITIONING
DUCT TEMPERATURE SENSOR (w/ Heater) - INSTALLATION
| 1. INSTALL DUCT TEMPERATURE SENSOR |
Attach the 4 claws to install the 2 sensors.
| 2. INSTALL REAR NO. 6 AIR DUCT |
Install the duct with the 5 screws.
Connect the 2 connectors.
| 3. INSTALL FRONT FLOOR CARPET ASSEMBLY |
Install the floor carpet.
| 4. INSTALL REAR NO. 1 SEAT PROTECTOR |
Attach the 10 claws to install the 2 seat protectors.
| 5. INSTALL REAR NO. 2 SEAT PROTECTOR |
Attach the 10 claws to install the 2 seat protectors.
| 6. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat) |
w/ Sliding Roof:
()
w/o Sliding Roof:
()
| 7. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH |
w/ Sliding Roof:
()
w/o Sliding Roof:
()
| 8. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat) |
w/ Sliding Roof:
()
w/o Sliding Roof:
()
| 9. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH |
w/ Sliding Roof:
()
w/o Sliding Roof:
()
| 10. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) |
Install the tonneau cover assembly.
| 11. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE |
w/ Sliding Roof:
()
w/o Sliding Roof:
()
| 12. INSTALL REAR DOOR SCUFF PLATE LH |
w/ Sliding Roof:
()
w/o Sliding Roof:
()
| 13. INSTALL REAR DOOR SCUFF PLATE RH |
w/ Sliding Roof:
()
w/o Sliding Roof:
()
| 14. INSTALL REAR NO. 2 SEAT ASSEMBLY LH |
for Face to Face Seat Type:
()
except Face to Face Seat Type:
()
| 15. INSTALL REAR NO. 2 SEAT ASSEMBLY RH |
for Face to Face Seat Type:
()
except Face to Face Seat Type:
()
| 16. INSTALL REAR NO. 1 SEAT ASSEMBLY LH |
for 60/40 Split Seat Type 40 Side:
()
for 60/40 Split Seat Type 60 Side:
()
| 17. INSTALL REAR NO. 1 SEAT ASSEMBLY RH |
for 60/40 Split Seat Type 40 Side:
()
for 60/40 Split Seat Type 60 Side:
()
| 18. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 19. CHECK SRS WARNING LIGHT |
()