Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUPPLEMENTAL RESTRAINT SYSTEMS

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK FRONT AIRBAG SENSOR LH

DTC B1615/14 Front Airbag Sensor LH Malfunction

DESCRIPTION

The front airbag sensor LH consists of the diagnostic circuit and the frontal deceleration sensor, etc.


If the center airbag sensor receives signals from the frontal deceleration sensor, it determines whether the SRS should be activated.


DTC B1615/14 is stored when a malfunction is detected in the front airbag sensor LH circuit.

DTC CodeDTC Detection ConditionTrouble Area
B1615/14When one of the following conditions is met:
A front airbag sensor LH malfunction.
A center airbag sensor malfunction.
Front airbag sensor LH
Center airbag sensor assembly

WIRING DIAGRAM

Dtc B1615/14  Front Airbag Sensor Lh Malfunction. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

INSPECTION PROCEDURE

  • NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
1.CHECK FRONT AIRBAG SENSOR LH
Dtc B1615/14  Front Airbag Sensor Lh Malfunction. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Turn the ignition switch off.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

Interchange the front airbag sensor LH with RH and connect the connectors to them.

Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.

Turn the ignition switch to ON, and wait for at least 60 seconds.

Clear the DTCs stored in the memory ().

Turn the ignition switch off.

Turn the ignition switch to ON, and wait for at least 60 seconds.

Check for DTCs ().

Result
ResultProceed to
DTC B1615 is outputA
DTC B1610 is outputB
DTC B1610 and B1615 are not outputC
  • HINT:
  • Codes other than DTC B1610 and B1615 may be output at this time, but they are not related to this check.
A
REPLACE CENTER AIRBAG SENSOR ASSEMBLY ()
B
REPLACE FRONT AIRBAG SENSOR LH ()
C
USE SIMULATION METHOD TO CHECK ()