Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - HEATING / AIR CONDITIONING

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

READ VALUE USING INTELLIGENT TESTER (AIR OUTLET DAMPER SERVO MOTOR)

CHECK AIR OUTLET DAMPER SERVO MOTOR (FOR DEF MODE)

CHECK AIR CONDITIONING HARNESS ASSEMBLY

DTC B1455/55 Driver Side Air Outlet Damper FOOT/DEF Control Servo Motor Circuit

DESCRIPTION

Air outlet damper servo motor (for DEF mode) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air outlet damper (for DEF mode) to any position, which controls the air outlet changes.


  • HINT:
  • Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.
DTC CodeDTC Detection ConditionTrouble Area
B1455/55 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the air outlet damper servo motor (for DEF mode)
Air outlet damper servo motor (for DEF mode)
Air conditioning harness assembly
Air conditioning amplifier assembly

WIRING DIAGRAM

Dtc B1455/55  Driver Side Air Outlet Damper Foot/Def Control Servo Motor Circuit. HEATING / AIR CONDITIONING. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

INSPECTION PROCEDURE

1.READ VALUE USING INTELLIGENT TESTER (AIR OUTLET DAMPER SERVO MOTOR)

Use the Data List to check if the servo motor is functioning properly.

Air Conditioner
Tester DisplayMeasurement Item/RangeNormal ConditionDiagnostic Note
A/O Damper FOOT/DEF Pos(P) Air outlet damper servo motor (for DEF mode) target pulse /
Min.: 6, Max.: 117
FACE1: 117 (pulse)
FACE2: 109 (pulse)
B/L1: 93 (pulse)
B/L2: 81 (pulse)
FOOT-D: 52 (pulse)
FOOT-R: 41 (pulse)
FOOT-F: 41 (pulse)
F/D: 18 (pulse)
DEF: 6 (pulse)
-
  • OK:
  • The display is as specified in the normal condition.
Result
ResultProceed to
OK (Checking from the DTC)A
OK (Checking from the PROBLEM SYMPTOMS TABLE)B
NGC
B
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()
C
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY ()
A
2.CHECK AIR OUTLET DAMPER SERVO MOTOR (FOR DEF MODE)

Replace the air outlet servo motor (for DEF mode) ().

  • HINT:
  • Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.

Clear the DTCs ().

Check for DTCs ().

Result
ResultProceed to
DTC B1455/55 is not outputA
DTC B1455/55 is outputB
B
Go to step 3
A
END (AIR OUTLET DAMPER SERVO MOTOR [FOR DEF MODE] IS DEFECTIVE)
3.CHECK AIR CONDITIONING HARNESS ASSEMBLY

Replace the air conditioning harness assembly ().

Clear the DTCs ().

Check for DTCs ().

Result
ResultProceed to
DTC B1455/55 is not outputA
DTC B1455/55 is outputB
B
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY ()
A
END (AIR CONDITIONING HARNESS ASSEMBLY IS DEFECTIVE)