Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK
DOOR CONTROL TRANSMITTER (w/ Entry and Start System) - REMOVAL
| 1. REMOVE TRANSMITTER BATTERY |
- NOTICE:
- Take extra care when handling these precision electronic components.
Push (for type A, for type B) or slide (for type C) the release hook knob and extract the emergency key.
| *A | for Type A, for Type B | *B | for Type C |
Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.
- NOTICE:
- When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.
| *A | for Type A, for Type B | *B | for Type C |
| *1 | Protective Tape | - | - |
- HINT:
- Tape the screwdriver tip before use.
Remove the battery (lithium battery: CR1632).
| *A | for Type A (lithium battery: CR1632) | *B | for Type B (lithium battery: CR1632) |
| *C | for Type C (lithium battery: CR2032) | - | - |
- NOTICE:
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.
Do not push the terminals with your finger.
Do not forcibly pry up the battery. The terminals may be damaged.
Do not touch the battery with wet hands. Water may cause rust.
Do not touch or move any components inside the transmitter. It may interfere with proper operation.