Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK
DOOR CONTROL RELAY (for RHD) - REMOVAL
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column) |
()
| 4. REMOVE STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) |
()
| 5. REMOVE DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY |
Disconnect the connector.
Remove the bolt and double lock door control relay assembly.