Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - METER / GAUGE / DISPLAY
COMBINATION METER (w/o Multi-information Display) - INSTALLATION
1. INSTALL COMBINATION METER ASSEMBLY |
Connect the connectors.
Install the combination meter with the 4 screws.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Attach the 9 claws to install the finish panel.
Attach the 4 claws.
3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Attach the 2 claws to install the panel garnish.
4. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
w/ Entry and Start System:
()
w/o Entry and Start System:
()
5. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the panel cushion.
6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Attach the 3 claws to install the panel garnish.
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter ().
When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().