Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - METER / GAUGE / DISPLAY
CLOCK SYSTEM - HOW TO PROCEED WITH TROUBLESHOOTING
- HINT:
- Use these procedures to troubleshoot the clock system.
1.VEHICLE BROUGHT TO WORKSHOP |
|
2.INSPECT BATTERY VOLTAGE |
- Standard Voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
|
3.PROBLEM SYMPTOMS TABLE |
Refer to problem symptoms table ().
Result | Proceed to |
Fault is not listed in problem symptoms table | A |
Fault is listed in problem symptoms table | B |
|
| ||||
|
4.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU ()
|
5.ADJUST, REPAIR OR REPLACE |
| ||||
|
---|