Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

CLIMATE CONTROL SEAT SWITCH - INSTALLATION

  • HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1. INSTALL SEAT HEATER SWITCH
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Attach the 2 claws to install the seat heater switch.

2. INSTALL SUSPENSION CONTROL SWITCH
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Attach the 4 claws to install the suspension control switch.

Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Connect the 2 connectors.

Attach the wire harness clamp.

3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Connect the connectors.

Attach the 14 claws to install the console panel.

4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Attach the 4 claws to install the box.

5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Attach the 9 claws to install the panel.

6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Connect the connectors.

Attach the 7 claws to install the panel.

7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

Install the shift lever knob and twist it in the direction indicated by the arrow.

Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Attach the 7 claws to install the panel pad.

Install the screw.

Install the clip.

9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Attach the 7 claws to install the panel cushion.

10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Connect the connectors and 2 clamps.

Attach the 8 claws to install the panel pad.

Install the screw.

Install the clip.

11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
Climate Control Seat Switch - Installation. SEAT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Attach the 7 claws to install the panel cushion.

12. INSPECT SEAT HEATER SYSTEM

Check the seat heater operation.

Turn the engine switch on (IG).

Turn the seat heater switch on.

Wait 5 minutes or more and confirm that the seat surface becomes warm.

13. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

Check the climate control seat operation.

When the climate control seat switch is turned on, check that the seat heater and blower operate based on the seat temperature.

If the seat temperature increases as a result of the seat heater operation, check that the seat heater operation stops and the blower operation continues.

  • HINT:
  • Based on the cabin temperature, seat temperature, etc., the seat heater operation time varies.