Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK
BACK DOOR LOCK - INSTALLATION
- NOTICE:
| 1. INSTALL BACK DOOR LOCK PROTECTOR (w/ Power Back Door) |
Attach the 2 claws to install the protector (A).
Attach the 7 claws to install the protector (B).
Install the screw.
| 2. INSTALL BACK DOOR LOCK ASSEMBLY |
w/o Power Back Door:
Install the back door lock assembly with the 3 bolts.
- Torque:
- 13 N*m{ 133 kgf*cm, 10 ft.*lbf}
Connect the connector.
w/ Power Back Door:
Install the back door lock assembly with the 4 bolts.
- Torque:
- 13 N*m{ 133 kgf*cm, 10 ft.*lbf}
Attach the guide.
Connect the connector.
| 3. INSTALL BACK DOOR LOCK COVER |
Attach the 4 claws to install the back door lock cover.
| 4. INSTALL REAR ASSIST GRIP REINFORCEMENT (for Face to Face Seat Type) |
Attach the 2 claws to install the rear assist grip reinforcement.
Install the 3 bolts.
| 5. INSTALL BACK DOOR GARNISH |
Attach the 14 clips to install the back door garnish.
| 6. INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type) |
Attach the 2 claws to install the door opening switch sub-assembly.
| 7. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type) |
Connect the connector.
Attach the 4 claws to install the No. 2 back door service hole cover.
| 8. INSTALL ASSIST GRIP (for Face to Face Seat Type) |
Install the assist grip with the 2 screws.
| 9. INSTALL BACK DOOR SIDE GARNISH RH |
w/o Power Back Door:
- HINT:
- Use the same procedure described for the LH side.
w/ Power Back Door:
Attach the clip and 4 claws to install the back door side garnish RH.
| 10. INSTALL BACK DOOR SIDE GARNISH LH |
Attach the 3 clips and 2 claws to install the back door side garnish LH.
| 11. INSTALL CENTER BACK DOOR GARNISH |
Attach the 5 clips and 4 claws to install the center back door garnish.