AIRBAG SYSTEM - HOW TO PROCEED WITH TROUBLESHOOTING
Use these procedures to troubleshoot the airbag system.
*: Use the intelligent tester.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| 2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| 3.CHECK CAN COMMUNICATION SYSTEM* |
Check for DTC ().
Result| Result | Proceed to |
| DTC is not output | A |
| DTC is output (for LHD) | B |
| DTC is output (for RHD) | C |
| | Go to CAN COMMUNICATION SYSTEM () |
|
| | Go to CAN COMMUNICATION SYSTEM () |
|
|
| 5.CHECK DTC (Present and Past DTCs)* |
Check for DTC ().
Result| Result | Proceed to |
| DTC is not output | A |
| DTC is output | B |
| | Go to PROBLEM SYMPTOMS TABLE () |
|
|
| 9.CLEAR DTC (Present and Past DTCs)* |
| 10.CHECK DTC (Present and Past DTCs)* |
Check for DTC ().
Result| Result | Proceed to |
| DTC is not output | A |
| DTC is output | B |
| | Go to DIAGNOSTIC TROUBLE CODE CHART () |
|
|